Ohmeda Care Plus Incubator

Dimensions

• Incubator with Elevating Base
• Height: 54 - 62 in (136.2 - 157.5 cm)
• Elevating base: 35 - 43 in (88.9 - 109.2 cm) mattress to floor
• Depth: 28 in (71.1 cm)
• Width: 33 in (83.8 cm)
• Weight: 195 lbs (89 kg)
• Incubator with Stationary Pedestal
• Height: 53 in (135.9 cm)
• Depth: 28 in (71.1 cm)
• Width: 33 in (83.8 cm)
• Weight: 180 lbs (80 kg)
• Drawer Packages for Elevating Base or Stationary Pedestal
• Overall: 11 x 11.5 x 18.25 in (28 x 29 x 46 cm)
• Single deep drawer: 10 x 9 x 16.5 in (25 x 23 x 42 cm)
• Dual drawer: 4.5 x 9 x 16.5 in (11 x 23 x 42 cm)
• Incubator with Cabinet
• Height: 55 in (141 cm)
• Depth: 25.5 in (64.6 cm)
• Width: 35 in (88.9 cm)
• Weight: 185 lbs (84 kg)
• Incubator Characteristics
• Casters: 5 inch diameter, 2 locking, 2 non-locking
• Mattress: 13.7 x 25.6 in (34.8 x 65 cm)
• Mattress to Hood: 16 in (41 cm)
• Door Height: 11 in (28 cm)
• Positions: Continuous from 0° to 12°
• Port holes: 6
• Tubing ports: 6

Electrical

• 120 VAC 60 Hz
• Models: 115 V ± 10% 5.7 amps
• Conforms to IEC 601.1, UL 544 and CSA 22.2 No. 125 requirements
• Nominal power consumption: 450 watts at maximum heater output
• Line voltage compensation: Input voltage is monitored and the heat output is adjusted to compensate for line voltage variations
• Leakage currents: Less than 100 micro amps on 120V units
• Leakage at patient probe: Less than 50 micro amps on 120V units

Environmental

• Operating temperature range: 68° - 86°F (20° - 30°C)
• Storage temperature range: 13° - 140°F (-25° - 60°C)
• Operating humidity range: 0 to 90%

System Controls

• Microprocessor-based control system: Self-test functions are performed at power-up and during normal operation
• Patient Control (Servo) Mode: 95° - 98.6°F (35° - 37°C)
• Air Control (Manual) Mode: 73.4° - 98.6°F (20° - 37°C)
• Up to 102.2°F (39°C) with control panel override switch
• Air Velocity: Average < 10 cm/sec with inner wall
• Temperature variability: Less than ± 0.2°F (0.1°C)
• Resolution: ± 0°F (0.1°C)
• Probe or interchangeability: ± 0.2°F (0.1°C)
• Average Oxygen Input Concentration Range: 5 L/min 25-45% | 10 L/min 35-65% | 15 L/min 45 to 70%
• Humidification: Standard — 10 to 75% dependent on nursery environment and incubator temperature setting | Servo — 40 to 85% regardless of nursery environment and incubator temperature setting