Air-Shields C-2000 Incubator

Air-Shields Incubator with VHA Stand

• Width: 38.0" (99 cm)
• Depth: 26.3" (67 cm)
• Height: 52.5" - 60" (133.4 to 152.4 cm)
• Weight: 198 lbs (90 kg)

Air-Shields Incubator with Fixed Height Stand

• Width: 46.8" (119 cm)
• Depth: 26.3" (67 cm)
• Height: 56" (142 cm)
• Weight: 175 lbs (79.5 kg)

Hood Specifications

• Mattress tray size: 16" x 32" (40.6 81 cm)
• Mattress to hood: 16.25" (41.2 cm)
• Access panel opening: 11" (28 cm)
• Standard hood includes: 4 port doors; 2 iris ports; front access panel; 3 left and 3 right tubing grommets-front
• Mattress tilt: 12 (1 C)
• Micro air intake filter: 99.9% efficiency
• Particle size removal: 0.3 micron
• Air mode control range: ;20 to 39.0C
• Air mode override: >37.0C
• Air flow velocity across mattress: <10 cm/sec
• Skin mode control range: 34.0 to 38.0 C
• Skin mode override: >37.0 C
• Temperature rise time (at 22C ambient): <35 minutes
• CO2 levels: <0.5% when delivered at 750 ml/min at a point 10 cm above the mattress
• Operating noise level in hood: 47 dBA (49 dBA with Servo Controlled Oxygen)
• Casters (4 casters, 1 steering): 5" (12.7 cm)
• RS-232 output
• Controller with LCD with brightness control
• Selectable color combinations: white on blue background (default) or yellow on black background
• Dual-skin temperature monitoring
• 6 AC (Mains) outlet
• Keypad lock
• 24 Hour trend of: Air temperature, skin temperature (1 and 2), Relative humidity, Oxygen concentration, Heater power

Environmental Requirements

• Operating temperature range: 20C to 30C ambient
• Storage temperature range: -25C to 60C ambient
• Operating humidity range: 5% RH to 99% RH, non condensing
• Storage humidity range: 0% to 99% RH, non condensing
• Operating RH sensor temp. range: 20C to 41C
• Operating O2 sensor temp. range: 20C to 41C
• O2 sensor calibration pressure: 600 to 900 mm Hg

Alarms

• Temperature (limiting ≤): 38C for air temp. < 37C; 40.0 C for air temp. > 37 C
• Baby set temperature: 1 C (or 0.5 C)
• Air set temperature: +1.5 C/-2.5 C

High/Low Skin Temperature Alarms

• High/low air temperature
• High temperature cut-out
• Air probe failure
• Skin probe failure/disconnect
• Low air flow
• Low humidity (humidity option)
• Low/high oxygen (3%) (oxygen option)
• Oxygen calibration required (oxygen option)
• Oxygen cell difference (oxygen option)
• Oxygen solenoid failure (oxygen option)
• Scale disconnect (scale option)
• Too much weight (scale option)

System Alarms

• Controller failure
• Sensor module failure
• sensor module out of position
• Motor failure
• Power failure
• Heater failure
• Sensor disconnected
• Key stuck

Servo Humidity Option

• Water capacity: 1000ml
• Refill time: >24 hrs @ 85 RH%
• Range: 30 to 95%
• Display accuracy: 6% RH%

Servo Oxygen Option

• Accuracy: 100% cal 3%
• Accuracy: 21% cal 5%
• Range: 21 to 65%
• Resolution: 1%

Scale Option

• Weight range: 0 to 15.4 lbs (0 to 7 kg)
• Weight display resolution: 1 g or 1 oz (OIML = 10 g or 1 oz)
• Weight accuracy: 2 g 1/2 digit up to 2 kg (OIML = 10 g); 5 g 1/2 digit over 2 kg
• Weight gain or loss trended over 7 days

Other Options (Attach to Accessory Rail)

• IV Pole weight limit: 10.4 lb (4.72 kg)
• Monitor shelf weight limit: 25 lb (11.4 kg)
• Rear access door: Provided with 2 port doors and 4 additional hood grommets 2 left and 2 right
• Rear access door: Provided with 2 port doors and 4 additional hood grommets 2 left and 2 right
• Oxygen tank mount

Drawer Options

• Large deep swivel type
• Two shallow swivel out type