Recessed Quick Connect Gas Outlet
Recessed Quick Connect Gas Outlet
Need help choosing?
Speak to one of our expertly trained specialists!
Need help Financing?
Check out financing options from OnePlace Capital.
All product and company names are trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement or sponsorship by them.
Details
The outlets are modular singles, and incorporate full faceplate color-coding. The single modular outlets are designed to provide for ganging of rough-in plates in the field to form multiples. The gas services are sequentially arranged and located as shown on the plans with a minimum centerline spacing of 4 ½ inches (11.5cm) between outlets. The medical gas outlets are designed so that the primary check valve can be removed for service without shutting off the gas supply to the outlet, the secondary check valve operates automatically to stop the free flow of the pressure gas.
The outlet nameplate are permanently color coded. The outlet faceplate is chrome plated zinc, attached with the nameplate to the rough-in assembly, and provide automatic plaster adjustment from1/2 to 7/8 of an inch (13 to 22 mm). The name of the gas service is can be marked on the outlet bracket and the outlet. The outlet’s rough-in supply tube is a 7 inch (18 cm) length of 1/2 O.D. copper Type K for all gas services and labeled with the name of the gas service.
Medical gas outlets are cleaned for oxygen service in accordance with the current Compressed Gas Association (CGA) Pamphlet G-4.1, capped and placed in a rotective container for shipment. The outlets should be installed in strict accordance with manufacturer’s instructions, and tested before use in conformance with local and federal codes.
Features
- UL Listed
- Conforms to NFPA 99 and CGA standards
- Ease of maintenance without removing the faceplate using a cartridge insertion tool
- Accepts Allied Chemetron gas specific compatible
male adaptors - Compensates for variation in wall thicknesses up
to 7/8†- Gas specific indexing
- Modular design
- All outlets are 100% tested for flow and leaks
- Full faceplate color coding
- 360% swivel inlet tube
- Strength of connections eliminates unintended disconnects
- Provides support for dispensing equipment without the use of additional brackets
- Metal back and front plates
- Available in the following connections: DISS, Ohmeda/Ohio, Puritan/Bennett, and Chemetron
- Made in the U.S.A.
Specifications
Specifications:
The outlets are modular singles, and incorporate full faceplate color-coding. The single modular outlets are designed to provide for ganging of rough-in plates in the field to form multiples. The gas services are sequentially arranged and located as shown on the plans with a minimum centerline spacing of 4 ½ inches (11.5cm) between outlets. The medical gas outlets are designed so that the primary check valve can be removed for service without shutting off the gas supply to the outlet, the secondary check valve operates automatically to stop the free flow of the pressure gas.
The outlet nameplate are permanently color coded. The outlet faceplate is chrome plated zinc, attached with the nameplate to the rough-in assembly, and provide automatic plaster adjustment from1/2 to 7/8 of an inch (13 to 22 mm). The name of the gas service is can be marked on the outlet bracket and the outlet. The outlet’s rough-in supply tube is a 7 inch (18 cm) length of 1/2 O.D. copper Type K for all gas services and labeled with the name of the gas service.
Medical gas outlets are cleaned for oxygen service in accordance with the current Compressed Gas Association (CGA) Pamphlet G-4.1, capped and placed in a rotective container for shipment. The outlets should be installed in strict accordance with manufacturer’s instructions, and tested before use in conformance with local and federal codes.
