Philips IntelliVue Telemetry System
Philips IntelliVue Telemetry System
Need help choosing?
Speak to one of our expertly trained specialists!
Need help Financing?
Check out financing options from OnePlace Capital.
All product and company names are trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement or sponsorship by them.
Details
The Philips IntelliVue Telemetry System brings optimal clarity when and where it's needed
The state-of-the-art Philips IntelliVue Telemetry System is ideal for mobile cardiac patients who need constant monitoring. This system provides information when and where you need it, whether the source is a networked bedside monitor, a wireless monitor, or a laboratory information system. It also has different types of transmitters to choose from, to best meet the needs of the patients.
The Philips IntelliVue Telemetry System uses cellular infrastructure with Smart-hopping technology. This technology provides clear two-way communications between transceivers and IntelliVue information system, to achieve precise connections and access for patients in case of excessive interference.
The Philips IntelliVue Telemetry System is available refurbished through Avante Animal Health. Contact your Avante representative for more information to create a system that meets your facility's needs.
Features
- Device location to prevent loss of telemetry devices
- Wireless bedside monitoring
- Lightweight and compact transceivers
- Monitors patients' ECG
- Measures SPO2 and pulse rate
- Fast switch cable allows ECG monitoring (3-, 5-, or 6-lead) using the telemetry transceiver or patient monitor without recabling electrodes
- IntelliVue Device Location shows which access point a receiver is associated with to locate missing devices more easily
- Auto-resumes monitoring when device comes back into network range
- 2 V-leads with 6-wire ECG provides an improved tachycardia assessment
- Audible feedback on transceiver for SpO2 spot checks
- Audible feedback when patient is out of range
- Coexists with UHF Philips Telemetry System
- Markings on leadsets and ports for easy setup
- Transceivers available in different sizes to meet your needs:
- TRx - EGC only
- TRx Plus - ECG and SpO2
Components
IntelliVue Clinical Network Infrastructure, transceivers, access points, information center.
Optional Monitors and Hardware: TeleMon database server, TeleMon companion monitor, patient monitors.
Specifications
Transmitter specifications
Electrical
- Power: 2 AA batteries
- Battery Lifespan: 50 hours (ECG only); 18 hours (ECG/SpO2 continuous)
- Lead insertion guide: Connection for 3-, 5-, or 6-wire headset
Transceiver current
- 51.3 mA at 2.4V, 42.0 mA at 2.6V (ECG only)
- 116 mA at 2.4 V, 100 mA at 2.6 V (ECG/SpO2 continuous)
Frequency range
- 1395-1400 MHz and 1427-1432 MHz
- 1.6 MHz channel spacing (TRx4841A)
- 2400-2483.5 MHz (Trx4851A / SRRA)
Size
- 5.6 in (H) x 3 in (W) x 1.14 in (D) (ECG only)
- 5.6 in (H) x 3.52 in (W) x 1.48 in (D) (ECG/SpO2)
- 3.5 in (H) x 1 in (W) x 0.5 (D) (SRRA)
Weight
- 5.8 oz (ECG only without batteries)
- 7.2 oz (ECG/SpO2 without batteries)
- 1 oz (SRRA)
Gain accuracy
- ±5% at 77° F
Monitor specifications
Dimensions
- 8.8 lb with ECG/Resp, NBP, SpO2 and battery
- 10.2 in x 9.8 in x 7.3 in without Predictive Temperature unit
- 12.3 in x 9.8 in x 7.3 in with Predictive Temperature unit
Power
- Power consumption: < 40W average, < 65 peak
- Line Voltage: 100 - 240 V
- Operating time: Basic monitoring configuration: >4 hours; Extended monitoring configuration: >3 hours
- Charge time: 4 hour when monitor is off; 5 + hours when monitor is in use
Display
- Resolution: 800 x 600
- Refresh frequency: 60 Hz
Battery
- One M4605A Battery required
- Dimensions: 5.866 in (W) x 3.504 in (D) x 0.78 (H)
- Weight: 1.08 lb per battery
- Nominal voltage: 10.8 Volt
